Solar Freezer
Solar Freezer with Panel
  • Solar Freezer with PanelSolar Freezer with Panel

Solar Freezer with Panel

This Solar Freezer with Panel was created by the supplier of FOSSIL is an all-in-one integrated solar-powered freezing storage device that enables 24/7 low-temperature freezing without relying on traditional power grids. It is suitable for remote off-grid areas, outdoor work sites, mobile business scenarios and emergency disaster relief needs. The matching high-efficiency solar panel converts light energy into stable electricity, and works with the energy storage module to achieve continuous refrigeration, providing an energy-saving, environmentally friendly, flexible and convenient low-temperature storage solution.

This solar freezer with matching solar panel is specially developed for off-grid scenarios, realizing full solar power driven from power generation to energy storage and refrigeration, no need to consume municipal electricity. Long-term use can significantly reduce electricity costs while reducing carbon emissions from fossil fuel power generation. The product adapts to a variety of usage scenarios: it can easily handle household food storage in remote mountainous areas and pastoral areas, on-site freezing and preservation of aquatic products and purchased agricultural products, cold chain sales for mobile street vendors, and low-temperature storage of emergency vaccines and medicines after natural disasters.

This China Solar Freezer with Panel by FOSSIL is fully debugged before delivery. After unpacking, users only need to complete simple installation and wiring of the solar panel to put it into use, no complicated additional configuration is required. The power of the matching power generation panel perfectly matches the refrigeration power of the freezer, so users do not need to calculate matching parameters by themselves, which lowers the barrier to use. The product provides a variety of volume specifications to meet the storage capacity requirements of different users, and corresponding models are available from small household use to medium commercial storage.

Solar Freezer with Panel

Material Introduction

Solar paneluses high-strength tempered glass panel with anti-reflection coating added to the surface, which can still maintain stable power generation efficiency in low-light environments. The frame is made of thickened aluminum alloy, which is anti-oxidation and anti-corrosion, can adapt to the harsh environment of long-term wind, sun and rain outdoors, and the service life can reach more than 25 years.

Cabinet shellis made of cold-rolled steel plate with electrostatic spray coating on the surface, which has excellent rust and corrosion resistance, is sturdy and durable, and can adapt to various complex outdoor environments. The corners are passivated with arcs to avoid bumping and scratching during use. For coastal high-humidity and high-salt fog environments, anti-corrosion spray-coated shells are optional to further improve durability.

Insulation layeradopts high-density imported polyurethane integral foaming with a density of 38kg/m³. The insulation performance is much higher than ordinary foaming materials, with low cold leakage rate, which can reduce the start-stop frequency of the refrigeration compressor, reduce power consumption, and extend the overall service life of the equipment. When the ambient temperature is 38℃, it can still maintain the internal freezing temperature for more than 72 hours after power off.

Inner lineris made of food-grade 304 stainless steel, safe and odorless, in line with the safety standards for food contact storage. It is anti-corrosion and low-temperature resistant, not easy to frost, and easy to clean, so it can safely store all kinds of fresh food and processed ingredients.

Core circuit moduleuses a waterproof sealed casing with a protection level of IP65, which can cope with outdoor rainy and dusty environments, avoid short circuit and leakage problems, and improve use safety.

Solar Freezer with Panel

Core Selling Points

● Integrated matching design:This Solar Freezer with Panel adopts an integrated matching design of power generation, energy storage and refrigeration. The power of the solar panel, the refrigeration system and the energy storage capacity are accurately matched before leaving the factory. Users do not need to match components by themselves, and can quickly install and use after unpacking, which lowers the threshold of purchase and use.

● No grid dependency:It runs completely on solar power, does not need to be connected to the municipal power grid, and has no continuous electricity bill. It is suitable for long-term use in areas without power, and can maintain continuous refrigeration in case of sudden power outages, avoiding losses caused by deterioration of stored items.

● Green, energy saving and environmental protection:It uses clean energy throughout the process and does not generate carbon emissions. Compared with traditional mains-powered freezers, it can reduce hundreds of kilograms of carbon dioxide emissions per year, which meets the needs of green development under the dual carbon goal. There is no noise pollution during use, and it will not affect the surrounding living environment.

● Wide environmental adaptability:It can work normally in a wide ambient temperature range from -20℃ to 45℃. The components are designed with temperature resistance protection for high and low temperature environments, and can operate stably in both the cold northern pastoral areas in winter and the southern outdoors with high temperature in summer.

● Low maintenance cost:The core components have a long service life, the solar panel has a 2-year warranty, and the compressor has a 3-year warranty. The overall structure is simple, there are no complicated additional components. Daily only need to regularly clean the dust on the surface of the solar panel, the maintenance cost is much lower than traditional freezing equipment.

Product Design Features

● Intelligent temperature control design:It adopts a microcomputer intelligent temperature control system, which can accurately adjust the freezing temperature in the cabinet according to storage requirements, the temperature control accuracy can reach ±1℃. The internal temperature is displayed in real time, which is convenient for users to check the storage status at any time. It will automatically remind when the energy storage power is too low to avoid abnormal temperature affecting stored items.

● Adjustable bracket design:The matching solar panel is equipped with an angle-adjustable mounting bracket. Users can adjust the inclination angle of the solar panel according to the latitude of the region and different seasons to maximize the efficiency of light energy reception and obtain more power generation. The bracket supports both floor installation and wall installation, which can adapt to different installation sites.

● Low-energy consumption refrigeration system:It adopts imported high-efficiency variable frequency compressor, which can reduce power consumption by more than 30% compared with ordinary fixed frequency compressors. The starting current is small, will not impact the energy storage system, and can maintain longer refrigeration operation in the case of insufficient light.

● Sealed door design:It uses double-layer high-density silicone rubber sealing strip, which automatically absorbs and seals after closing the door, and the cold leakage rate is much lower than the industry standard. The door body is equipped with a non-slip embedded handle, which is convenient to open and close, not easy to accumulate dust. Children can easily operate it without getting their hands caught.

● Dual compatibility design:It reserves a mains connection interface. In case of insufficient light during continuous rainy days, it can be switched to mains power supply mode, which ensures no cooling interruption with double guarantee and improves the reliability of use in complex weather conditions.

Notes

1.When installing the solar panel, you need to choose an open site without shading, avoid trees and buildings blocking the light, which will affect the power generation efficiency. Clean the dust, fallen leaves, snow and other obstructions on the surface of the solar panel regularly to ensure stable power generation efficiency.

2.Avoid violent collision when moving the product. Empty the stored items in the cabinet and cut off the power connection before handling, to avoid circuit looseness or inner tank deformation affecting the performance.

3.When cleaning the inside of the cabinet, you need to cut off the power first, use a soft damp cloth with neutral detergent for cleaning. Do not use hard brushes, strong acid and alkali cleaners to clean, so as not to damage the inner liner and sealing layer.

4.This Solar Freezer with Panel needs to be placed on a flat and solid ground, avoid tilting placement which will cause abnormal operation of the compressor and shorten the service life. When placed outdoors, it needs to be fixed against wind to avoid the equipment tipping over in windy weather.

5.Regularly check whether the insulation layer of the circuit connection cable is damaged, and whether the terminal of the solar panel is loose. Contact after-sales personnel for maintenance in time if any problem is found. Do not disassemble the core circuit part by yourself to avoid safety accidents.

6.When the product is not used for a long time, you need to cut off the power, drain the residual cold air inside, open the door for ventilation and drying to avoid peculiar smell and mold inside.

Send Inquiry
Contact Info
For Solar Freezer, Solar Fridge, Solar Fan or pricing inquiries, share your email—we'll respond within 24 hours.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept